CMPS10 Tower
Devantech
Overview
The CMPS10 tower module is a 3D printed ABS plastic tower developed to elevate your CMPS10 module above the metal of your robot. It is a clip together structure that does not require screws. It is designed to fit the R1 Research Platform.
Assembly
The first step is to glue the top plate to the tower riser. The top plate is inserted into the riser with the slots locating into the arms inside the riser tube. You will not need to take this apart so bond it firmly with plastic cement (the kind obtained from model shops to glue plastic kits together) and put it aside until set firmly.
Exploded view showing how the CMPS10 Tower fits together
When the top plate has firmly set, the tower may be assembled. The spacer is placed on the top plate and then the CMPS10 tray. The clip snaps over the whole assembly holding it firmly in place. During assembly a cable may be fed trough the tower riser and the spacer ready to connect to the CMPS10 module.
Image of the tower with the top plate glued into position, and the assembled tower
Contact us
Obsolete item
This item is not available any more. Some components might no longer be manufactured or there is an improved successor model.
Share
About ROBOT ELECTRONICS
ROBOT ELECTRONICS is a brand by English manufacturer Devantech Ltd., based in Norfolk. Product range comprises sensors, in particular ultrasonic or compass, servocontrollers as well as small robot drive systems or relay modules with various interfaces. Sensors are produced in England and are of consistently high quality.
More from ROBOT ELECTRONICS
