TCP184 - industrial 4 x 16A relays

Devantech

Overview

Ruggedised, Industrial, DIN rail mounting control module.
Ethernet connected module, 10/100Mb auto negotiated.
Relays – 4 x 16Amp 250Vac C/O. with snubbers on N/O contacts.
Inputs – 8 optically isolated inputs, selectable as digital, 12-bit analogue or counter.
Power – AC mains universal input: 90 – 264Vac, 47-63Hz.
Connections – Screw Terminals for N/O N/C and Common contacts
Module size – 170mm x 104mm, DIN rail mounted
Controlled graphically by secure webpage or optionally one of ASCII, Binary or Modbus command sets over TCP/IP.
Email notifications – 8 selectable notifications, up to 100 emails/hour max.
Peer to Peer – Control relays on other modules.
Schedules – Able to schedule events based on time of day/week
Counter/Timers – Count or time events. Up to 2KHz counting on all inputs.
MODBUS gateway to downstream MODBUS modules such as the MBH88.

Technical data

TCP184
Serial ports	1 x RS485
Relays	4 with up to 16Amp @24vdc or 250vac, screw Terminals for N/O N/C and Common contacts
Inputs	8 flexible channels, your choice of VFC input, counters or 12-bit analogue input
Communication	USB for development, RJ45 ethernet for normal access
Power	90 - 264Vac, 47-63Hz

Requirements

dScript editor requires one of:

• Windows 7 or later
• Linux
• macOS

YouTube Videos

Getting started with your dScript module

Control a dS1242 with Amazon Alexa

dScript MQTT communication with mosquitto and NodeRed

Firmware versions

Devantech regularly updates the firmware for their dScript modules. Possibly modules are not equipped with the most recent version. The modules can be updated easily.

Download

Update Version 4.12 - 20/06/2023

dScript downloads - Link to the manufacturer

Documentation and dScript examples for version 4.12

Updates in version 4.09 - 6/10/2021

Module code: Added 3 new commands to Binary and AES Binary command sets to control all relays in one command. Set all, set selected and clear selected.

dScript downloads - Link to the manufacturer

Update Version 3.01 - 22/03/18

Important changes from V2.20 - Please read!

To provide a consistent interface between all dS series modules, the digitalport addresses of LEDs and I/O have changed.
dS1242 I/O addresses have changed from 9-12 to 41-44
dS3484 I/O addresses have changed from 9-16 to 41-48
Other modules use flexport s which have not changed.

The digitalports of onboard LEDs on all modules have changed as follows:

Led	v2.20	v3.01
Blue	32	33
Green	33	34
Red	34	35

dScript documentation, editor and examples (pdf, Version 3.01)
dScript user manual only (pdf, Version 3.01)

TCP184 manual (pdf, Version 3.01)