R1 Battery Holder II Base Plate and Clipper

WORLD OF ROBOTS

This is the most flexible battery holder for R1 robot module to mount the 12V batteries of both 134*69*23 mm (such as PS-1230) and 98*43*52 mm (such as PS-1212) sizes. And it also has an additional accessory called 'clipper', which can tighten the battery perfectly with help of wing nuts. Not included are screws, washers and butterfly nuts. These are available separately in the R1 Battery Holder II Screw Set.

Technical specifications

R1 Battery Holder II
Colour	Black
External Dimensions	190*78*42 mm
Internal dimensions	134*69*23 mm
Weight	111g

Design for 3D printing by FDM with PLA

The 3D printing process: FDM

Fused Deposition Modeling (FDM) is the most widely used form of 3D printing at the consumer level. FDM works with a range of standard thermoplastics, such as ABS, PLA, and their various blends. The technique is well-suited for basic proof-of-concept models, as well as quick and low-cost prototyping of simple parts, such as parts that might typically be machined.

The material: PLA

Poly(lactic acid) or polylactic acid or polylactide (PLA) is a biodegradable and bioactive thermoplastic aliphatic polyester derived from renewable resources.

High quality PLA, Classic Black
Features: Tensile resistant, abrasion-resistant, insensitive to stress corrosion cracking.

The quality: 100 µm

Quality is most important. We follow certain standards to develop products:

• ISO 9001:2015 design process
• Several iterations from prototypes to product
• Hole diameter according to EN 20273 technical standard
• Smooth edges
• Layer thickness: 100 µm layers

The design: simple and free of support-material

Our design focuses on economy and ecology by optimising FDM print parts to be free of support-material. Advantages of a design optimised for the FDM printing process are:

• Less material and less weight by avoiding support structures through intelligent design and testing
• Reduction of printing time consumption
• Reduction of post-processing time needed
• Reduction of cost