Request for quotation

Phone +49 941 463718-50
Fax +49 941 463718-79
E-Mail: mail@reichel-versand.de
Contact form

Availability

Not in stock. We will obtain the article for you.

Estimated manufacturer's time of delivery: 14 days
updated: 17/11/2023

CE30-A Solid-State LiDAR

Enabling Unimpeded Driving

Benewake

Mechanical single channel LiDAR is pretty common in our life, but two problems cannot be neglected, i.e. short life span and high price due to the rotating measurement mode. Benewake launches CE30, a solid-state LiDAR with large FoV. It could simultaneously output grey and depth information within 132° horizontal FoV and 9° vertical FoV. Meanwhile no mechanical rotating components exist internally, so higher reliability and stability could be ensured. Based on the optimized obstacle avoidance mode, the region of interest (ROI) can be customized to focus on the obstacle information in the ROI and enable unimpeded driving. It can be applied in the general vehicle field, including Automated Guided Vehicle (AGV, such as intelligent warehouse vehicle), autopilot cars and industrial automation, etc.

Solid-state design is adopted without any mechanical rotating components, to guarantee the service life and enhance detecting stability and reliability; compact structural design, embedded in the robot..

The main features are: Two modes are available, Point Cloud Mode focuses on 3D depth information; Obstacle Avoidance Mode further processes the point-cloud data to output the position of the nearest obstacle.


CE30 Series Comparison Image

Benewake CE30-A, B and C comparison image


CE30 Series Comparison Table

CE Series Differences

Product name Distance Output Dimensions Accuracy
CE30-A 0.1-4m@90%, 0.1-1.5m@10% CE30-A output is single point data that points out the location of closest obstacle. 79 mm width x 50 mm height ≤6cm
CE30-C 0.1-4m@90% in FoV center, 0.1-2m in FoV edge CE30-C output is a 320 x 24 depth matrix which presents the distance information in front of its field of vision. So CE30-C offers more information of an area and can be used in more applications, such as people counting and object recognition. 79 mm width x 50 mm height ≤6cm
CE30-D 0.4/0.7-30m@90% reflectivity. Edge blind zone 40cm, center blinde zone 70cm. CE30-D field of view is 60x4 degree and range 30m 83 mm width x 54 mm height ≤15cm

The detecting range result is based on a whiteboard with reflectivity 90%. The detecting range is significantly shorter on a blackboard with reflectivity 10%. Different angles also lead to different maximum detection ranges.

For more information about each item please read carefully the corresponding specification.


Technical data

CE30-A Solid-State LiDAR
Method Time Of Flight (TOF)
Light source Modulated near-Infrared Light
Wavelength 850nm
External dimensions 79*47*50mm
Weight 219gm
Supply voltage 12V DC (≥2A)
Power consumption ≤6W
Range 10cm to 400cm
Scan window (or) FOV 132°*9°
Accuracy ≤6cm
Pixel Resolution 320*24
Ranging Resolution 1cm
Scans per second (Frame Rate) 20fps
Communication Interface CAN (Controller Area Network)
Precision cm
Temperature range 0° to 50° C
Life time 14,000 hours at normal temperature environment
Ambient Light Resistence 60klux


Solid-state design

    Highlights
  • No rotating components
  • more than 10,000 hours of lifetime

Benewake CE30-C Wide Field Of View, FOV 132 degrees x 9 degrees


Typical Applications

CE30 could be applied in the intelligent warehouse, AGV, industrial automation, aided/unmanned driving, etc. to address the need of obstacle avoidance, mapping and navigation in intelligent unmanned equipment.


AGV Obstacle Avoidance

During operation an AGV equipped with the CE30-A can detect people within its detection range. If a sudden obstacle appears during the vehicle movement, the vehicle could slow down or stop immediately until the path is clear. Different materials in various colors can be detected.

Benewake CE30-A During operation the AGV can detect the approach of people

Benewake CE30-A Example of a warehouse AGV


Videos


Benewake solid-state LiDAR CE30



LiDAR-CE30-Benewake CE30 applications


Downloads

Technical Specifications

Manual

Software


Manufacturer's data

CE30 Solid-State LiDAR


Product information for: CE30-A Solid-State LiDAR

Publishing date (date of last technical specification): 2018-03-14
Length: 79 mm
Width: 50 mm
Height: 57 mm
Weight: 219 g
Shipping weight: 500 g
Manufacturer: Benewake
Brand: Benewake
Article number: BWA-CE30-A
Manufacturer's part number: CE30-A

The article CE30-A Solid-State LiDAR is listed in the following categories:

Sensors > 3D LiDAR

CE30-A Solid-State LiDAR BWA-CE30-A

CE30-A Solid-State LiDAR

from Benewake
Newest specification: 03/2018
Request for quotation


Article no.: BWA-CE30-A
More details...
CE30-C Solid-State LiDAR BWA-CE30-C

CE30-C Solid-State LiDAR

from Benewake
Newest specification: 03/2018
Request for quotation


Article no.: BWA-CE30-C
More details...
CE30-D Solid-State LiDAR BWA-CE30-D

CE30-D Solid-State LiDAR

from Benewake
Newest specification: 03/2018
Request for quotation


Article no.: BWA-CE30-D
More details...

Contact us

* These fields are mandatory.

Request for quotation

Phone +49 941 463718-50
Fax +49 941 463718-79
E-Mail: mail@reichel-versand.de
Contact form

Availability

Not in stock. We will obtain the article for you.

Estimated manufacturer's time of delivery: 14 days
updated: 17/11/2023

Share

More from Benewake