ETH0621 - 24v Motor controller and ethernet relay module
Devantech
Overview
The ETH0621 offers 6 digital inputs (accepting 10V - 24V), 2 independently switched 24V 5A outputs and a 24 volt, 5A motor controller that effortlessly integrates motion control over Ethernet. The ETH0621 also includes a motor surge protection circuit that shuts the motor down in the event of the current exceeding 22A.
Operating Temperature
-40C to +85C
LED indication
The ETH0621 provides a blue LED for indication of power to the board, this will pulse quickly in the event of the firmware being updated and for 400ms every 2 seconds in the event that the board has detected a current surge and shut the motor down. There are red LED's mounted next to the digital outputs and relays to indicate there state. Green LED's are mounted next to each of the 6 inputs to indicate active inputs.
Relay power rating
If the contact load voltage and current of the relay are in the region enclosed by the solid and dotted lines in the figure below, the relay can perform stable switching operation. If the relay is used at a voltage or current exceeding this region, the life of the contacts may be significantly shortened.
load type | Typical applications | Rating | Max DC load capacity |
AC1 | Non inductive or slightly inductive loads |
16A @ 250V AC | |
AC15 | Control of electromagnetic load (>72VA) |
3A @ 120V AC 1.5A @ 240V AC |
|
AC3 | Control of motor | 750W | |
DC1 | Non inductive or slightly inductive loads |
16A @ 24V DC | |
DC13 | Control of electromagnetic loads |
0.22A @ 120V DC 0.1A @ 250V DC |
Control
The relay board communicates via TCP/IP and is controlled with a set of commands, which are sent to the board's IP-address on a configurable port. The commands are sequences of bytes, for example:
The sequence 0x20, 0x01, 0x32 will turn on relay number 1 for 5 seconds. A full specification can be found at the manufacturer's spec (see link below).
Control via ASCII-commands and also a long requested feature of control via http is possible with all available firmware versions. For example: Sending a http GET to
192.168.0.200/io.cgi?DOA1=10
sets relay 1 on active for 1 second (This would use the default address 192.168.0.200). You can test these functions by typing them directly into the address bar of most internet browsers.
Also be aware that you may need to disable http authentication in the http configuration if your control device does not support it.
A full specification and firmware updates can be found at the manufacturer's spec (see link 'Technical Specification' below).
Connections
Mapped inputs
Digital inputs of the ETH484, ETH484-B, ETH044, ETH8020 or WIFI484 are able to be configured to remotely control outputs on all of Devantech's new ethernet relay boards (both wired and WIFI), the older ETH-RLY02 and ETH-RLY16 are not compatible however. The mapped inputs offer simple linking and versatile usage, an input in one country can control a output in another, or across a small network.
Possible target boards are:
The independent inputs can be mapped to different relays (on the same or different boards). In the "Address of target board", you can enter an IP address or hostname (which will be converted to an IP address by the DNS server supplied in the board configuration). If the module is on the local network then you can use the assigned IP address, if the target is over the internet then you need to supply the gateway in the configuration (internet source IP like your router) and the "Address of target board" is the IP address of the targets internet connection (to point at the router).
Board dimensions
IO Network - Android and iPhone App
Devantech created the free app 'IO network', available for Android and iPhone to remotely control your relays. Download it from Google Play or iTunes. Search for "Devantech" and you will find the app.
IO Network documentation for Android
IO Network documentation for iOS
Manufacturer's data
Product information for: ETH0621 - 24v Motor controller and ethernet relay module
Publishing date (date of last technical specification): 2015-02-27
Length: 143 mm
Width: 84 mm
Weight: 260 g
Shipping weight: 300 g
Manufacturer: Devantech
Brand: ROBOT ELECTRONICS
Article number: DEV-ETH0621
Manufacturer's part number: ETH0621
The article ETH0621 - 24v Motor controller and ethernet relay module is listed in the following categories:
Modules > Relay > Ethernet
plus EUR 5.95 shipping costs
Prices incl. VATEUR 84.86
plus EUR 5.00 shipping costs
Prices excl. VAT
Article no.: DEV-DS378
More details...
dScript2824 - 24 x 16A ethernet relay without snubbers
without snubbers (Variations available)from ROBOT ELECTRONICS
Newest specification: 09/2016
plus EUR 5.95 shipping costs
Prices incl. VATEUR 142.00
plus EUR 5.00 shipping costs
Prices excl. VAT
Article no.: DEV-DS2824
More details...
plus EUR 5.95 shipping costs
Prices incl. VATEUR 47.88
plus EUR 5.00 shipping costs
Prices excl. VAT
Article no.: DEV-ETH002
More details...
plus EUR 5.95 shipping costs
Prices incl. VATEUR 142.00
plus EUR 5.00 shipping costs
Prices excl. VAT
Article no.: DEV-ETH8020
More details...
plus EUR 5.95 shipping costs
Prices incl. VATEUR 52.08
plus EUR 5.00 shipping costs
Prices excl. VAT
Article no.: DEV-DS1242
More details...
plus EUR 5.95 shipping costs
Prices incl. VATEUR 72.25
plus EUR 5.00 shipping costs
Prices excl. VAT
Article no.: DEV-DS3484
More details...
plus EUR 5.95 shipping costs
Prices incl. VATEUR 52.92
plus EUR 5.00 shipping costs
Prices excl. VAT
Article no.: DEV-ETH002-B
More details...
plus EUR 5.95 shipping costs
Prices incl. VATEUR 74.77
plus EUR 5.00 shipping costs
Prices excl. VAT
Article no.: DEV-ETH008-B
More details...
plus EUR 5.95 shipping costs
Prices incl. VATEUR 99.98
plus EUR 5.00 shipping costs
Prices excl. VAT
Article no.: DEV-ETH044
More details...
ETH0621 - 24v Motor controller and ethernet relay module
from ROBOT ELECTRONICSNewest specification: 02/2015
plus EUR 5.95 shipping costs
Prices incl. VATEUR 73.93
plus EUR 5.00 shipping costs
Prices excl. VAT
Article no.: DEV-ETH0621
More details...
Contact us
Order online now
Immediate delivery
Available for immediate delivery while stock lasts.
3 in stock
updated: 17.11.2023
Information on currency
EUR 87.98 = GBP 75.23
EUR 73.93 = GBP 63.21
(€1=GBP0.85505)
EUR 87.98 = USD 100.72
EUR 73.93 = USD 84.64
(€1=USD1.1448)
EUR 87.98 = CAD 126.83
EUR 73.93 = CAD 106.58
(€1=CAD1.4416)
EUR 87.98 = AUD 138.04
EUR 73.93 = AUD 116.00
(€1=AUD1.5690)
Share
About ROBOT ELECTRONICS
ROBOT ELECTRONICS is a brand by English manufacturer Devantech Ltd., based in Norfolk. Product range comprises sensors, in particular ultrasonic or compass, servocontrollers as well as small robot drive systems or relay modules with various interfaces. Sensors are produced in England and are of consistently high quality.